Android 2+32GB Car Stereo Wireless Carplay Android Auto Double Din Radio 10.1 1280*720 IPS Screen WiFi GPS Navigation Bluetooth USB FM/RDS Receiver AHD Backup Camera

System:Android 13 Chipset:MTK-8227L Screen size:9"/10.1" Memory:2GB (RAM)+32GB (ROM) Screen resolution:1280*720 Radio chip:MT6625 Power output:4*45W Work temperature:-20-75 Steering wheel control function:Support Power amplifier chip:TDA7388 Radio Band:FM/RDS Video output:Support Reversing input: AHD/CVBS External microphone: support Split screen: support Maps:Built-in offline maps(requires internet to download data) WIFI:Support USB:Double USB interface Audio format:APE/FLAC/WAV/MP3/WMA etc Video format:MKV/RMVB/AVI/MP4/MDV etc Picture format:PNG/JPEG/JPG/GIF/WBMP/BNP etc Factory setting keyword:8888 Language:Chinese/English/French/Italian/Korean/Japanese/Arabic/Spanish/Portuguese/Russian/Turkish/Vietnamese/Hebrew/Polish/German Package Included: Main Unit * 1 Power Cable * 1 RCA Cable * 1 GPS Antenna * 1 USB Cable * 2 WiFi Antenna * 1 Reverse input Cable * 1 External Microphone * 1 AHD Reverse Camera * 1 ------------------------- Wiring: ACC : Connect to car ignition detective cable B +: Connect to the car battery positive GND: Ground to battery negative KEY1/ KEY2: Depending on the radio compatibility with your car SWC, select one line to connect. But two steering wheel controllers need to connect two cables. BACK: Connects to the rear camera input port. Lamp Control: Connect to the small lamp in the front of the car, to turn on the button backlight. ANT CONT: Connect to car radio antenna (if no antenna, no wiring). Signal Input: Connect to the input port of the reversing camera(The two small short lines are the wifi and bluetooth antennas, to enhance the bluetooth and wifi signals). ----------- Tips: 1.Why can't turn on the car radio ? 1.1Please check the Voltage of car radio:12V 1.2When you test this car radio,you can combine the red and yellow wires and connect them to the positive side of the power supply.Black line to negative power supply. 1.3Replace the same type of insurance to test the car radio. Note: Please must use our power cables to connect our car radio,it is not possible to insert the original car plug directly into our machine. 2.Why the car radio will show "No Signal" when we reversing? Please check if the camera's line is properly connected to the car radio. Note:The video port of rear camera must insert the "CAMIN" port of car radio. 3.Why does the camera display "!" and "Can't watch video while driving" when I use USB to watch videos? Please turn off the "Video Warning" function in the settings,then will be OK. 4.Why can't search FM? 4.1: No radio antenna inserted; 4.2: Please check if the radio antenna is plugged in. Please insert more antennas several times to make it well contacted; 4.3: The signal of your location is not good. Please go to a better place to test again 4.4: The radio antenna on the car is broken/no effect; please replace the radio antenna and test again. 5.Why can't connect the Bluetooth of car radio? 5.1 Open the phone settings interface, open the Bluetooth in the Bluetooth function, search for Bluetooth devices, find the player's Bluetooth model to be paired; if you need a pairing code, enter 0000; if not, try 1234 or 123456. 5.2 Please try to use another mobile phone to test this function. All methods are correct and still cannot use Bluetooth, Please unplug the plug on the back of the player and plug it in after 3 minute.