Hopkins Towing Solutions LED 4in Sealed Round Stop-Tail-Turn Light Kit, C542RTM

Hopkins Towing Solutions LED 4in Sealed Round Stop-Tail-Turn Light Kit, C542RTM Works with 12 V systems When the light is in use, it aesthetically looks more like an incandescent light but features the efficiency of the LED light Allows use of both LED and incandescent lights on the trailer Long lasting - 6x the life of incandescent technology Current draw: 0.2 Amps INSTALLATION INSTRUCTIONS:1. Disconnect vehicle battery2. Light must be mounted using the enclosed rubber grommet. A 4 diameter hole is required to secure the grommet/light assembly properly3. Push rubber grommet into opening. Connect plug to light, feed wires through grommet and snap light into grommet4. Attach the black wire to tail lamp circuit of the vehicle. Attach the red wire to the stop/turn circuit of the vehicle5. A good ground (-) connection is necessary. Use a file or screwdriver blade to clean away/remove any rust or paint from the metal surface where the ground is mounted. Attach white wire to ground (-)6. Reconnect vehicle battery.